Kramer VS-88UHD Скачать руководство пользователя

Страница: 8 / 78

Kramer Electronics Ltd.

VS-88UHD – Installing in a Rack

Installing in a Rack

This section provides instructions for rack mounting the

VS-88UHD

. Before installing in a rack,

verify that the environment is within the recommended range:



Operation temperature – 0



to 40



C (32 to 104



F).



Storage temperature – -40



to +70



C (-40 to +158



F).



Humidity – 10% to 90%, RHL non-condensing.

When installing on a 19" rack, avoid hazards by taking care that:



It is located within recommended environmental conditions. Operating ambient

temperature of a closed or multi-unit rack assembly may exceed ambient room

temperature.



Once rack mounted, there is enough air still flow around the

VS-88UHD



The

VS-88UHD

is placed upright in the correct horizontal position.



You do not overload the circuit(s). When connecting the

VS-88UHD

to the supply

circuit, overloading the circuits may have a detrimental effect on overcurrent protection

and supply wiring. Refer to the appropriate nameplate ratings for information. For

example, for fuse replacement, see the value printed on the product label.



The

VS-88UHD

is earthed (grounded) and connected only to an electricity socket with

grounding. Pay particular attention when electricity is supplied indirectly (for example,

when the power cord is not plugged directly into the wall socket but to an extension

cable or power strip). Use only the supplied power cord.

To rack-mount the VS-88UHD:

1. Attach both ear brackets to the

VS-88UHD

Remove the screws from each side of the

VS-88UHD

(3 on each side), and replace them

through the ear brackets.

2. Place the ears of the

VS-88UHD

against the rack

rails and insert the appropriate screws (not provided)

through each of the four holes in the rack ears.

Some models, may feature built-in rack ears:



Detachable rack ears can be removed for desktop use.



Always mount the

VS-88UHD

in the rack before connecting any cables or power.



If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack
Adapters user manual for installation instructions available from our Web site

www.kramerav.com/downloads/VS-88UHD

Проконсультироваться

купить

данное

оборудование

вы

можете

компании

АНД

Системс

адрес

: 125480,

Москва

ул

Туристская

.33/1; site: https://andpro.ru

тел

: +7 (495) 545-4870 email: [email protected]

При

обращении

используйте

промокод

AND-PDF

получите

скидку

Содержание VS-88UHD















































































Результаты поиска

Содержание VS-88UHD

Отзывы:

Похожие инструкции для VS-88UHD

Бренды по названию

Популярные бренды

Kramer VS-88UHD, Руководство пользователя

Результаты поиска

Содержание VS-88UHD

Отзывы:

Похожие инструкции для VS-88UHD

Бренды по названию

Популярные бренды