Kramer Electronics Ltd.
VS-44H2
– Operating VS-44H2 Via Front Panel Buttons
11
Switching a Pattern to an Input
VS-44H2
generates 4 embedded patterns. These patterns can be routed at a resolution of
480p to one output at a time. A pattern is selected by pressing inputs 1 to 4 when in the
Pattern mode as follows:
1 (Color Bars)
2 (Solid Blue)
3 (Solid Green)
4 (Solid Red)
Figure 4: VS-44H2 Embedded Patterns
To route a pattern:
1. Press
MUTE/PATTERN
. The MUTE/PATTERN button flashes.
▪
If there is currently no pattern routed to an output, all 4 inputs on the 7-segment
display hyphens.
▪
If a pattern is currently routed to an output, the pattern number is displayed under
that output and the other inputs display a hyphen.
2. Select the output to which the pattern is routed.
3. Select the pattern (1 to 4) by pressing an input. The 7-segment display returns to normal
operation mode and
“P
” under the selected output number indicates that a pattern is
routed to that output.
A pattern is routed to the selected output.
Storing and Recalling Presets
You can store up to 8 presets. Each setup includes the device configuration, excluding
Network settings, security configuration and Maestro configuration.
In Store-Recall mode, OUT 1 corresponds to setup 1, IN 1 corresponds to setup 5, and so on.
Figure 5: VS-44H2 4K 4x4 Matrix Switcher Front Panel
Storing Presets
To store a preset:
1. Press
STO
on the front panel button. The STO button flashes.
2. Press an IN or OUT button (for example, IN 1).
The selected button flashes until the current configuration is stored.
The current configuration is stored to preset 5.
3
5
