©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
54
6.5.3.3
Input Mode
Defines whether the incoming audio signal is stereo and mono
Settings:
Stereo / Mono
Default :
Stereo
6.5.3.4
Input Mute
Enables of the mute function for the selected audio source
Settings:
Yes / No
Default : No
6.5.3.5
Amp Gain
Amp gain adjusts the gain for the D-power amp driving speakers.
Settings:
0 to +38 db
Default : 0 db
6.5.3.6
Audio Assign
This menu allows users to assign any analog audio source or mics to the selected input. If the selected
input is digital, the user can also select the audio that is embedded to the video signal. These
selections can be performed on per input basis or globally.
6.5.3.6.1
Config
Selects whether the A
udio assignments are done per source or globally
Settings:
Per Inp / Globally
Default : Per Inp
6.5.3.6.2
Audio In
This menu is enabled when the audio assignments are done globally. If an Analog source is selected,
the user also choose the analog audio source from the next menu (Analog In). If a Digital source is
selected, the embedded audio in the selected audio source will be used.
Settings:
Stereo Analog / Analog with Mic / Digital
Default :
Stereo Analog
6.5.3.6.3
Analog In
This menu is enabled when the audio assignments are done globally. From this menu the user selects
the audio source to be assigned to the selected input
Settings:
CVBS / HDBaseT / Display Port / HDMI 1 / HDMI 2 / VGA / DVI / HDMI 3
Default : CVBS
