©
KRAMER ELECTRONICS LTD.
Issue 1-16 May 30, 2017
31
6.1.3.6
RGB Values
This is a user-defined colour temperature setting where R,G,B gain (white balance) and offset/bias
(black balance) can be adjusted separately in order to match the display device.
This control is not available for output modes with colour space format YUV 4:2:0.
Settings :
Red/Green/Blue Gain/Bias : -512 to 512
Default
: 0
6.1.3.7
Colour Temp
A preset range of Colour Temperature allowing the user to select from pre-configured colour
temperatures to match the colour temperature of the incoming signal. If this value Native Colour
Temp value in the Output menu are the same, no conversion is performed.
Settings:
3200K, 3700K, 5500K, 6500K, 7500K, 9300K
Default :
6500K
6.1.3.8
Input Gamma
Set this value to match the gamma of the input signal. Input and output gamma both default to 1.0. If
they are both set to the same value, there is no effect on the image.
Settings:
1.0 to 3.0 in steps of 0.1
Default :
1.0
6.1.4
Geometry
This menu contains adjustments associated with setting up position, aspect ratio and scale of the
input signal.
6.1.4.1
Picture Format
This feature allows the user to format the output image when the input aspect ratio is different to the
display panel’s aspect ratio. Four formats are available: Original, Full Screen, Crop and Anamorphic.
Original: T
he input image is scaled to fit the display area either horizontally or vertically without any
distortion. The input aspect ratio is preserved and unused areas on the top/bottom or left/right are set
black.
Full Screen: T
he input image is scaled to completely fit the display area without preserving the aspect
ratio of the source. This will cause distortion but no black areas will be visible.
Crop: T
he input image is scaled to completely fit the display area while preserving the aspect ratio of
the source. Portions of the input image on the top/bottom or left/right will be cropped out of the output
image.
