Kramer VP-554X, Руководство пользователя

Страница: 84 / 89

Kramer Electronics Ltd.
VP-554X
– Protocol 3000
82
Function Description Syntax Parameters/Attributes Example
X-ROUTE? Get routing status.
It is recommended
to use the command
#SIGNALS-LIST
to get
the list of all signal IDs
available in the system
and which can be used
in this command.
VIDEO
.
1
are the default
<signal_type>
and
<index>
in this
command and are
implied even if not
written:
#X-
ROUTE

out . sdi . 5 , i
n . sdi . 1 <CR>
is interpreted as:
#X-
ROUTE

out . sdi . 5 . v
ideo . 1 , in . sdi . 1 . v
ideo . 1 <CR>
This is an Extended
Protocol 3000
command.
COMMAND
#X-ROUTE?

<direction_type1> . <port_type1> . <port_index1> .
<signal_type1> . <index1> <CR>
FEEDBACK
~nn@X-ROUTE  <direction_type1> . <port_type1> .
<port_index1> . <signal_type1> . <index1> , <direction_type2> .
<port_type2> . <port_index2> . <signal_type2> .
<index2> <CR><LF>
The following attributes comprise
the signal ID:
▪
<direction_type>
–
Direction of the port:
o
IN
– Input
o
OUT
– Output
▪
<port_format>
– Type of
signal on the port:
o
HDMI
o
HDBT
o
ANALOG_AUDIO
▪
<port_index>
– The port
number as printed on the front
or rear panel
▪ <signal_type> – Signal ID
attribute:
o
VIDEO
o
AUDIO
▪ <index> – Indicates a specific
channel number when there
are multiple channels of the
same type
Get the routing status:
#X-ROUTE?

out . hdmi . 5 .
video . 1 <CR>
X-SIGNAL? Get input signal status.
This is an Extended
Protocol 3000
command.
COMMAND
#X-SIGNAL?

<direction_type> . <port_format> . <port_index> .
<signal_type> . <index> <CR>
FEEDBACK
~nn@X-SIGNAL  <direction_type> . <port_format> .
<port_index> . <signal_type> . <index> , status <CR><LF>
The following attributes comprise
the signal ID:
▪
<direction_type>
–
Direction of the port:
o
IN
– Input
▪
<port_format>
– Type of
signal on the port:
o
HDMI
o
HDBT
▪ <port_index> – The port
number as printed on the front
or rear panel
▪
<signal_type>
– Signal ID
attribute:
o
VIDEO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type
status
– Input Signal Status
0
– No signal
1
– There is a signal
#X-
SIGNAL

in . hdmi . 1 . vide
o . 1 <CR>
~01@X-
SIGNAL

in . hdmi . 1 . vide
o . 1 , 1 <CR><LF>
ROUTE Command
layer_type out_index in_index Description
Value Definition Value Definition Value Definition
1 video 1~4 1:Output1
2:Output2
3:Output3
4:Output4 1~11 1:HDMI1
2:HDMI2
3:HDMI3
4:HDMI4
5:HDMI5
6:HDMI6
7:HDBT1
8:HDBT2
9:HDBT3
10:HDBT4
11:PC Set video source
1 video 0~5 0:no
change(VP-
554X video
source
unchange )
1:Output1
2:Output2
3:Output3
4:Output4
5:all(Output1~4) (7~10):(1~4) 7:1 HDBT1 : step in
device input 1
8:2 HDBT2 : step in
device input 2
.
.
. only for step in devices with HDBT out
Set VP-554X video step in video source
1 video 0~5 0:no
change(VP-
554X video
source
unchange)
1:Output1
2:Output2
3:Output3
4:Output4
5:all(Output1~4) (1~6):(1~4) 1:1 HDMI1 : step in
device input 1
2:2 HDMI 2 : step in
device input 2
5:4 HDMI 5: step in
device input 4. only for step in device with HDMI out
Set VP-554X video step in source