Kramer VP-554X, Руководство пользователя

Страница: 7 / 89

Kramer Electronics Ltd.
VP-554X
– Defining VP-554X Presentation Switcher/Scaler
5
Defining VP-554X Presentation
Switcher/Scaler
This section defines VP-554X .
Figure 1: VP-554X Presentation Switcher/Scaler Front Panel
# Feature Function
To USB OUT Buttons
(1 to 4) Press a USB button to switch a USB input (1 to 4) to the USB output.
OUT Buttons (1 to 4) Press an OUT button followed by an IN button to switch an input to a
selected output.
IN Buttons HDMI
INPUTS Press an HDMI INPUT button to switch an HDMI input to a selected
output.
HDBT
INPUTS Press an HDBT INPUT button to switch an HDBT input to a selected
output.
PC IN Press to switch the PC (VGA) input to a selected output.
STO Button Press and hold (until button flashes once) to store the current
configuration of the unit.
RCL Button Press and hold (until button flashes once) to recall the stored
configuration.
OSD OUT LEDs Indicates on which output the OSD is currently displayed (OUT 1 to OUT
4).
OSD SELECT Button Press to select the output on which the OSD will be displayed (cycles
through OUT 1 to OUT 4).
MENU Button Press to display the OSD menu.
Navigation
Buttons

Press to decrease numerical values or select from several definitions.

Press to move up the menu list values.

Press to increase numerical values or select from several definitions.

Press to move down the menu list.
ENTER Press to accept changes and change the SETUP parameters.
RESET TO XGA/1080p
Button Press and hold for about 2 seconds to set the output resolution to XGA
(1024x768).
Press and hold for about 5 seconds to set the output resolution to 1080p.
PANEL LOCK Button Press and hold for about 3 seconds to lock/unlock the front panel
buttons.
ETH RJ-45 Port Connect to a PC via a LAN to control the device and for firmware
upgrade.
1
2
3
4
5
6
7
8
9
10
11
12
13
14