Kramer Electronics Ltd.
VP-554X
– Operating and Controlling VP-554X
19
Menu Item
Function
0~100 (Default: 80). (Use this feature to limit the maximum analog
output volume level).
HDMI MUTE
Mute the HDMI audio.
OFF/ ON (Default: OFF).
LINE MUTE
Mute the analog audio.
OFF/ ON (Default: OFF).
MUTE FOLLOW
OFF/ BLANK/FREEZE/BLANK+FREEZE (Default: OFF).
AUDIO DELAY
OFF/ 10ms/ 20ms/ 30ms/ 40ms/ 50ms (Default: OFF).
MIXER MODE
OFF/ MIXER/ TALKOVER (Default: OFF).
MIXER LEVEL
0~100 (Default: 100).
TALKOVER
When Mic Mode is set to Talkover (see
), set
the following:
Depth [%]
Set the depth value to determine the decrease of the audio level during
microphone takeover (press + to further decrease the talkover audio
output level; press
– to lessen the talkover output audio decrease level).
Trigger [dB]
Set the trigger value to determine the microphone threshold level that
triggers the audio output level decrease.
Attack Time
Set the attack time to set the
transition
time of the audio level reduction
after the signal rises above the threshold level.
Hold Time
Set the hold time to define the time-period talkover remains active
although the signal falls below the threshold level (for a short period of
time).
Release Time
Set the release time to define the transition time for the audio level to
return from its reduced level to its normal level after the Hold Time
period.
EQ
Set the Audio equalization: EQ 120Hz, 200Hz, 500Hz, 1200Hz, 3000Hz,
7500Hz, 12000Hz or reset to default value.
RESET AUDIO
Select to reset all the audio parameters to their default values.
5. Press
ENTER
.
Audio parameters are defined.
Talkover Mode
Figure 8: Talkover Mode
