KRAMER: SIMPLE CREATIVE TECHNOLOGY
Updating the VP-4x8 Firmware
28
11. Click
Run
.
As each stage of the operation completes, the check-box for that stage
changes to green
1
.
When the operation is complete, all four check-boxes are green and the
message Memory Verify Pass appears
2
in the status bar.
VS4x8.hex
Figure 18: Atmel – Flip Window (Operation Completed)
12. Close the Atmel – Flip window.
13. Power OFF the
VP-4x8
.
14. If required, disconnect the null-modem adapter
from the
VP-4x8
.
15. Press in the PROGRAM button on the underside of the
VP-4x8
to return it
to its original position (see
Figure 1
).
16. Power ON the
VP-4x8
.
9.2 Upgrading the Ethernet Firmware
To update the
VP-4x8
Ethernet
firmware:
Download the file from the Internet (see section 9.2.1)
Connect a PC to the RS-232 port (see section 9.2.2)
Install the latest firmware (see section 9.2.3)
1 See also the blue progress indicator on the status bar
2 If an error message: “ Not Finished” shows, click Run again
