KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-4x8 4x8 VGA / UXGA Matrix Switcher
20
To confirm several actions (in the Confirm mode), do the following:
1. Press each
OUT-IN combination in sequence.
The corresponding 7-segment
Display blinks. The TAKE button also
blinks.
2. Press the blinking TAKE button to confirm all the actions.
The corresponding 7-segment
Display no longer blinks. The TAKE button
illuminates.
7.3 Storing/Recalling Input/Output Configurations
You can store and recall up to 12 input/output configurations using the 4
input buttons and the 8 output buttons, as
Figure 10
illustrates:
Figure 10: Storing and Recalling using the Input/Output Buttons
7.3.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the 12 INPUT/OUTPUT buttons (this will be the setup # in
which the current status is stored). If in the Confirm mode, press the
blinking TAKE button to confirm the action.
The memory stores the data at that reference.
7.3.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate INPUT/OUTPUT button (the button # corresponding
to the setup #). If in the Confirm mode, that setup configuration will blink in
the 7-segment
Display, together with the RCL button and the TAKE button,
and will only be implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
