KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-4x8 4x8 VGA / UXGA Matrix Switcher
8
4.1 Using the IR Transmitter
You can use the
RC-IR2
IR transmitter to control the machine via the
built-in IR receiver on the front panel or, instead, via an optional external IR
receiver
1
. The external IR receiver can be located 15 meters away from the
machine. This distance can be extended to up to 60 meters when used with
three extension cables
2
.
Before using the external IR receiver, be sure to arrange for your Kramer
dealer to insert an internal IR connection cable
3
, which is required so that
the REMOTE IR 3.5mm connector can be used. Connect the external IR
receiver to the REMOTE IR 3.5mm connector.
Control the matrix switcher using the front panel buttons, or remotely via
the Kramer
RC-IR2
Infrared Remote Control Transmitter, via an external
remote IR receiver (optional), or via RS-485 or RS-232 serial commands
transmitted by a touch screen system, PC, or other serial controller.
1 P/N: C-A35M/IRR-50
2 P/N: C-A35M/A35F-50
3 P/N: 505-70434010-S
