Operating Your Audio Matrix Switcher
17
7.3 Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1. Press an OUT button
1
.
The corresponding Audio and
2
/or Video IN STATUS 7-segment
displays
3
blink.
2. Press an IN button
4
.
The selected input switches to the selected output.
For example, press the ALL button and then IN button # 2 to connect
input # 2 to all the outputs
7.4 Confirming Settings
Choose to work in the AT ONCE or the CONFIRM mode.
In the AT ONCE mode:
You save time
Actions require no user confirmation
Execution is immediate
No protection is offered against changing an action in error
In the CONFIRM mode:
You have an optional method to help avoid making a mistake
Every action requires user confirmation
Execution is delayed
5
until the user confirms the action
Protection is offered to prevent erroneous switching
You can key-in several actions and then confirm them by pressing the
TAKE button once, to simultaneously switch all monitors
Pressing an
OUT-IN combination when your
VP-4x4xl
operates in the AT
ONCE mode implements the switch immediately. When the
VP-4x4xl
operates in the CONFIRM mode, press the blinking TAKE button to authorize
the switch.
1 Either 1, 2, 3, 4 or ALL
2 When the audio-follow-video option is active (refer to section 7.2.1)
3 Items 8 and 9, respectively, in Figure 1
4 Either 1, 2, 3, 4 or OFF
5 Failure to press the TAKE button within one minute (the Timeout) will abort the action
