Operating Your Audio Matrix Switcher
15
7 Operating Your Audio Matrix Switcher
You can operate your
VP-4x4xl
via:
The front panel buttons
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
The IR remote control
7.1 Displaying Unit Characteristics
The STATUS VIDEO and AUDIO 7-segment displays show three sets of
information, as defined in Table 6:
Table 6: STATUS 7-segment Display
The STATUS Display
Shows:
When:
1
1
2
2
3
3
4
4
STATUS
OUT
IN
A UDIO
V IDEO
The machine name
Machine name
Immediately (and
automatically) after switching
on the power
When simultaneously pressing, for 3
seconds, the 3 “IN” buttons 1, 2 and
3
1
Number 1 indicates the
MACHINE #
Number 10 indicates the
firmware version #
1
1
2
2
3
3
4
4
STATUS
OUT
IN
A UDIO
V IDEO
Unit characteristics:
Firmware version
Machine number
Immediately after the “First Display”
2
Audio inputs switched to
the outputs
Video inputs switched to
the output
1
1
2
2
3
3
4
4
STATUS
OUT
IN
A UDIO
V IDEO
Normal display:
Inputs switched to the
outputs
During normal operation, appears a few
seconds after the first and second
displays
3
1 The STATUS shown here is an example of what could typically be displayed. The actual display depends on the current
firmware version and machine number
2 The STATUS shown here is an example of what could typically be displayed. The actual display depends on the current
video and audio switching status
3 The “First Display” and the “Second Display” appear initially one after the other, followed a few seconds later by the
“Normal Display”
