Operating Your Switcher
25
7.2 The Independent Switchers Mode
In the independent switchers mode, the three switchers of the
VP-23N
operate
independently from each other, as illustrated in Figure 13. You can route one
of the 4 CV inputs, one of the 4 Y/C inputs and one of the 4 VGA/UXGA
inputs to the corresponding CV, Y/C and UXGA
1
outputs, respectively.
To switch an input to an output
2
:
Press one
3
button from the set of 4 buttons in the VIDEO (CV)-AUDIO
SELECTOR section and/or
4
One button from the set of 4 buttons in the s-VIDEO (Y/C)-AUDIO
SELECTOR section and/or
One button from the set of 4 buttons in the VGA/UXGA-Audio
SELECTOR section
Each pressed button illuminates
5
, indicating selection and outputting of that
video and audio source.
Video Acceptor
s-Video Sources
s-Video Acceptor
CV Video Sources
UXGA Sources
UXGA Acceptor
Speakers
Figure 13: Separate Switcher Mode
1 And to the UXGA CAT5 OUT connector
2 Assuming that all inputs are connected
3 You cannot select more than one button in a section
4 You can overlook a section and choose not to select a button from it
5 Pressing an illuminated button for more than 2 seconds will disconnect the output and the button will no longer illuminate
