VP-23C - Connecting the VP-23C
9
The COMP/UXGA OUT 15-pin HD connector to the component video
input of the projector
When connecting a component video input or output, connect Y to PIN 1, U to
PIN 2 and V to PIN 3 on the 15-pin HD connector.
The VGA/UXGA OUT 15-pin HD connector to the VGA/UXGA input of
the projector
3. Connect the appropriate unbalanced stereo audio sources (not shown in
Figure 3
).
4. Connect the MASTER AUDIO OUT RCA connectors to an amplifier with
speakers.
5. Connect a dynamic or a condenser microphone, if required, to the MIC IN
6.3 mm phone jack connector.
Use the COND. MIC / DYN. MIC switch (refer to item 2 in
Figure 2
) to select a dynamic
microphone or a condenser
6. As an option, you can connect a PC and/or controller to the RS-232 port
(see
Section 5.1
).
7. Connect the power cord (not shown in
Figure 3
).
