8
VP-23C - Connecting the VP-23C
5
Connecting the VP-23C
Always switch off the power to each device before connecting it to your
VP-23C. After connecting your VP-23C, connect its power and then
switch on the power to each device.
In
Figure 3
, the audio input connections are not shown, except for the microphone.
In this example, all the outputs are connected to the same projector. Use the
projector controller to switch between the VP-23C video outputs or the projector
inputs.
To connect the VP-23C, as illustrated in the example in
Figure 3
, do the following:
You do not need to connect all the inputs.
1. Connect the following video sources:
Although in this example not all the sources are connected (for example, the s-Video
source), you can connect all of the inputs, that is, 10 in total.
One composite video source (for example, composite video
player 1) to the CV IN 1 RCA connector
One composite video source (for example, a composite video
player 2) to the CV IN 2 RCA connector
One component video source (for example, component video
player 1) to the COMP/UXGA IN 1 15-pin HD connector
When connecting a component video input or output, connect Y to PIN 1, U to
PIN 2 and V to PIN 3 on the 15-pin HD connector.
When the 15-pin HD connector is used for UXGA signals, the syncs are on PIN
13 and PIN 14
One component video source (for example, a component video player
2) to the COMP/UXGA IN 2 15-pin HD connector
One VGA/UXGA source (for example, a computer graphics source) to
the VGA/UXGA IN 1 15-pin HD connector
2. Connect the acceptors to a projector as follows:
In this example a projector is used, but you can also connect separate outputs such as
displays, video recorders and so on
The composite video CV OUT RCA connector to the composite video
input of the projector
i
