12
VP-23C - Operating the VP-23C Presentation Switcher
6
Operating the VP-23C Presentation Switcher
You can operate your VP-23C via:
•
The front panel buttons
•
RS-232 serial commands transmitted by a touch screen system, PC, or other
serial controller
The front panel buttons include the INPUT SELECTOR buttons, the MASTER and MIC
AUDIO LEVEL BUTTONS, and the MUTE, LOCK and MIX buttons.
6.1
Operating your Switcher
You can select the video signals within each switcher group by pressing the
relevant INPUT SELECTOR buttons.
You can overlook a switcher group and choose not to select a button from it.
You can switch:
•
One of the two composite video VIDEO (CV) inputs to the composite video
output
You cannot select more than one button in a section.
•
One of the two s-Video (Y/C) inputs to the s-Video output
•
One of the two component video COMP/UXGA inputs to the component
video output
•
One of the four VGA/UXGA inputs to the VGA/UXGA output
The selected button in each group is illuminated in red. Pressing an illuminated
button for more than 2 seconds disconnects the output and the button no longer
illuminates.
The VP-23C operates in the audio-follow-video (AFV) mode so that the audio
signal follows the selected input signal in which all operations relate to both the
video and the audio channels.
