Kramer Electronics Ltd.
VM-10H2
– Defining the VM-10H2 4K HDMI 2.0 1:10 DA
4
Defining the VM-10H2 4K HDMI
2.0 1:10 DA
This section defines the
VM-10H2
.
Figure 1:
VM-10H2
4K HDMI 2.0 1:10 DA
Front Panel
#
Feature
Function
ON LED
Lights green when the device is powered on.
EDID READ Button
Press to select the chosen output (see
EDID SELECT Button
Press to sequentially cycle through the outputs (see
STATUS IN and OUT
LEDs
IN LED Lights green when an active input signal
is detected.
OUT LEDs (1 to 10) Lights green when an active output acceptor is
detected, flashes when HDCP is not supported by the acceptor.
PROGRAM USB
Connector
Use to upgrade the device firmware, also works with the EDID Designer.
INPUT HDMI Connector Connects to the HDMI source.
OUT HDMI Connectors
(1 to 10)
Connect to up to 10 HDMI acceptors (not all outputs need to be
connected).
SETUP DIP-switches
RS-232 3-pin Terminal
Block Connector
Connects to an RS-232 controller.
Power Socket, Fuse and
Power Switch
Connects power to and switches the unit on and off.
1
2
3
4
5
6
7
8
9
10