Kramer Electronics Ltd.
VM-10H2
– Protocol 3000
22
HDCP-STAT
Functions
Permission
Transparency
Set:
-
-
-
Get:
HDCP-STAT?
End User
Public
Description
Syntax
Set:
None
-
Get:
Get HDCP signal status
#HDCP-STAT?
SP
stage
,
stage_id
CR
Response
Set / Get: ~
nn
@HDCP-STAT
SP
stage
,
stage_id
,
status
CR LF
Parameters
stage
– input/output
0 - Input
1 - Output
stage_id
– number of chosen stage (1.. max number of inputs/outputs)
status
– signal encryption status - valid values ON/OFF
0 - HDCP Off
1 - HDCP On
2 - Follow input
3 - Mirror output
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Response is sent to all com ports after execution if HDCP-STAT was set by any other external control
device (button press, device menu and similar) or HDCP mode changed
Notes
On output
– sink status
On input
– signal status
K-Config Example
Get the HDCP input signal status of the source device connected to HDMI IN 1:
“#HDCP-STAT? 0,1”,0x0D
SIGNAL
Functions
Permission
Transparency
Set:
-
-
-
Get
SIGNAL?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get input signal status
#SIGNAL?
SP
inp_id
CR
Response
~
nn
@SIGNAL
SP
inp_id
,
status
CR LF
Parameters
inp_id
– input number
status
– see Input Signal Status
Response Triggers
After execution, a response is sent to the com port from which the Get was received
Response is sent after every change in input signal status ON to OFF, or OFF to ON
Notes
K-Config Example
Get the input signal status:
“#SIGNAL? 1”,0x0D