Kramer VIA Campus 2, Руководство пользователя, Страница: 130 / 138

Kramer Electronics Ltd.
VIA Campus², VIA Campus² PLUS
– For User: Participating in a VIA Meeting
128
Creating a Unicast Streaming URL
To create a unicast streaming URL:
1. Find the IP address of the receiver using one of the following methods:
▪
Windows computers
– Type ipconfig in the Command Prompt.
▪
Mac computers
– Type ipconfig in the Terminal.
▪
Another VIA unit
– Use the room name that appears on the Home screen.
2. Use any allowed port number from 1
– 65536.
3. Use the following format for a UDP URL:
udp://<IP address>:<port number>/.
Example: For a receiver with an IP address of 192.168.100.123 and an allowed port of
2234, the UDP URL is:
udp://192.168.100.123:2234/
OR
Use the following format for an RTP URL:
<rtp>:<ip>:<port>
Feeding Receiver Information to VIA Campus², VIA Campus² PLUS
The receiver information must be fed to VIA Campus², VIA Campus² PLUS before streaming
can begin.
To feed receiver information to VIA Campus², VIA Campus² PLUS:
1. In the Streaming tab in the VIA settings template (see Configuring VIA Settings
Template on page 39 ), paste the receiver URL in the Streaming URL text box. The URL
must be in the format explained in Creating a Unicast Streaming URL on page 128 .
2. Click the Streaming switch ON.
Streaming is activated, and the Streaming URL field is disabled.
To change the receiver URL while streaming, click the Streaming switch OFF, paste the new
URL in the box and click the Streaming switch ON again.
Streaming from one VIA Unit to Another VIA Unit
To stream from one VIA gateway unit (such as VIA Campus², VIA Campus² PLUS ) to
another VIA unit, you need:
•
Two VIA gateway units, one for a receiver and one for a sender.
•
One Windows or Mac computer with the latest VIA client application installed.
To stream from one VIA unit to another VIA unit:
1. Connect the two VIA units and the computer to the same network.
2.
Use the receiver VIA’s room name to create a URL as described in
Creating a Unicast
Streaming URL on page 128 .
3. On the computer, launch the VIA client application and log on to the sender VIA unit.
4. Take moderator rights if Moderator Mode is on.