![background image](http://html1.mh-extra.com/html/kramer/tp-43/tp-43_user-manual_2002374010.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-43 Component – S/PDIF Transceiver
6
5.1 Connecting a TP-43 Component – S/PDIF Transceiver
To
configure a
TP-43
Component – S/PDIF Transceiver
, as the example in
Figure 5
illustrates, do the following:
1. Connect the:
Y, U, and V RCA (component video) OUTPUT connectors to
a component acceptor (for example, a plasma display)
S/PDIF (digital audio) RCA OUTPUT connector to an AV
Receiver
2. Connect the
LINE IN
connector of the
TP-43
to the
LINE OUT
connector
of the
TP-41
, via UTP cabling (maximum range of 300ft (100m)).
3. Connect the
LINE OUT
connector of the
TP-43
to the
LINE IN
connector
of the
TP-42
, via UTP cabling (maximum range of 300ft (100m)).
4. Connect a 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 5
).
5. If necessary, adjust
1
the appropriate level(s) of the
TP-43
, the:
Local output: Y, U and V signal levels, Y, U and V
compensation equalization levels, and the digital audio
S/PDIF level and compensation equalization level
Line output: Y, U and V signal levels, and the digital audio
S/PDIF level
1 Insert a screwdriver into the small hole and carefully rotate it, trimming the level
Содержание TP-43
