6
Yarden 6-ID - Overview
#
Feature
Function
1
Tap Selector
Adjust each speaker to the appropriate tap setting:
For 70V: 3.7W, 7.5W, 15W or 30W
For 100V: 7.5W, 15W or 30W
Or select 8
(to bypass the transformer when connecting
directly to an amplifier without using the 70/100V array
option), see
Figure 4
2
Tweeters
2 pivoting tweeters, reproduce the higher frequency sounds
3
Woofer Driver
Reproduces low frequencies
4
Speaker Grille
Protects the internal components of the speaker from
foreign objects.
5
Selector Switches
Stereo/Mono to select the stereo or mono option
Music/Speech to select the music or speech option
6
Left (L) and Right (R)
Terminal Block
Connectors
Use the left and right terminal blocks to setup a stereo
speaker (see
Figure 2
)
Note that you can use any one of the two terminal block
connecters
for a “Mono” setup (once the selector switch is
set to Mono): one +, - pair for the input (see
Figure 8
)
7
Mounting Tab (6)
For installing the speaker in the wall.
Figure 2
shows the
Yarden 6-ID
setup in stereo mode:
Figure 2: Yarden 6-ID Stereo Mode