10
Yarden 6-ID - Installing the Yarden 6-ID
4.4
Mount onto the Wall
To mount the speaker to the wall:
1. Insert the speaker into the opening in the wall.
2. Tighten the mounting tabs (6) by turning the screws counter clockwise (see
Figure 5
).
Turning one quarter of a circle rotates the tab outwards; after that the screw is turned to
tighten the tabs to the rear side of the wall surface
When tightening the mounting tabs, the tabs automatically turn outward, thus
clamping the speaker to the wall from its rear side.
Do not over-tighten the screws. It may cause damage to both the
speakers and the surface.
Figure 5: Tighten the Mounting Tabs
4.5
Setting up an Array Installation
When installing
Yarden
6-ID
in an array installation layout, you have to define the
distance between speakers as well as the layout pattern (square or hexagonal).
The distance between speakers is set according to the uniformity of the coverage
desired and the budget.
The coverage angle of the speaker determines the coverage area and the number
of speakers required in the array installation. Two patterns are usually used for
array installations, square (see
Figure 6
) or hexagonal (see
Figure 7
), depending
on the shape of the installation area. The speakers are positioned according to
their coverage area.
i