Kramer SPK-I651T-KI, Руководство пользователя

Страница: 12 / 18

Yarden 6-ID - Installing the Yarden 6-ID 9
Figure 4: Adjust Tap Selector
Stereo Mode (see Figure 2 ) Mono Mode (see Figure 8 )
5. Set the selector switch to STEREO. Set the selector switch to MONO.
6. Push the grille firmly in place. Push the grille firmly in place.
7. On the L terminal block, connect one
of the + and
– terminal block pairs on
the rear panel (see Figure 1 ) by
connecting the wire from the:

Negative left terminal on the
receiver into the negative
terminal block of the speaker

Positive left terminal on the
receiver into the positive
terminal block of the speaker
On any one of the terminal blocks,
connect one of the + and
– terminal
block pairs on the rear panel (see
Figure 1 ) by connecting the wire from
the:

Negative terminal on the
receiver into the negative
terminal block of the speaker

Positive terminal on the
receiver into the positive
terminal block of the speaker
8. On the R terminal block, connect
one of the + and
– terminal block
pairs on the rear panel by
connecting the
wire from the:

Negative right terminal on the
receiver into the negative
terminal block of the speaker

Positive right terminal on the
receiver into the positive
terminal block of the speaker