Kramer SP-1G, Руководство пользователя

Страница: 19 / 31

16 SP-1G - Using the SP-1G Menus
6.4.2 Setting the Output Standard Mode
To set the output standard mode:
• Press ▼ or ▲ until SET1. Outp. Stand mode
• Press ◄ or ► to choose settings: AUTObyRefSour. or FORCED
Note : In order to make the AUTO Output Standard mode available, it is necessary
to turn on the Genlock State (see Section 6.6.3 ). If the Genlock State is turned off,
then FORCED STANDARD is used.
Note : If the SDI output standards are strictly defined and never change, FORCED
mode is recommended.
• Press ENTER to save the setting temporarily (only until powered off)
6.4.3 Generating a Test Signal
To generate a test signal:
• Press ▼ or ▲ until SET1.TestSignal appears
• Press ◄ or ► to choose the settings: NO TEST SIGNAL , COLOR
BARS100% , SPLIT BARS100% or RAMP100%
• Press ENTER to run the test
• To stop the test, return to NO TEST SIGNAL and press ENTER
6.5 Setting the Image Size and Position
This parameter is used to set the image size or position on the screen. The image
size can be changed separately for SDTV and HDTV input signals.
To set the image size or position:
• Press MENU to enter the menu mode
• Press ▼ or ▲ until SET1. IMAGE SIZE / POS (enter submenu) is displayed
• Press ENTER go into the submenu
• Press ▼ and ▲ to navigate through the submenu