KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the SP-11HD HD-SDI Processor
12
7
Operating the SP-11HD HD-SDI Processor
Operate your
SP-11HD
via:
•
The front panel buttons
•
RS-232 serial commands transmitted by a touch screen system,
PC, or other serial controller
To operate the
SP-11HD
using the front panel buttons, do the following:
1. Turn on the power and press the INPUT button to select the source to
convert: CV, YC, YUV or SDI.
The appropriate INPUT LED lights (indicating selection of that source).
2. Press the AUTO button to select input standard that cycles as follows:
AUTO, 480i/60, 480p/60, 576i/50, 576p/50, 720p/50, 720p/59.94, 720p/60,
1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98, 1080p/24, 1080p/25,
1080p/29.97, 1080p/30, 1080psf/23.98, 1080psf/24, 1080psf/25,
1080psf/29.97 and 1080psf/30.
With a CVBS or Y/C input source, the cycling sequence is reduced to three
modes: AUTO, 480i/60 and 576i/50. The appropriate
1/1.001
LED, one
SCANNING FORMAT
LED, one
FIELD/FRAME RATE
LED and one
ACTIVE LINES PER FRAME
LED lights. If the AUTO button does not
illuminate, it means a forced input standard. Otherwise, the AUTO button
illuminates, lighting LEDs to indicate the detected input standard.
3. Adjust the color, brightness, contrast, hue, sharpness
1
, H-shift, V-shift
2
•
Press the appropriate button
,
and/or video gain of the picture, as follows:
3
•
Press the + button or - button once to gradually increase or
decrease the current level by one unit (the 7-segment
display
shows the new level)
To increase or decrease the current level rapidly, press and
hold the + button or - button, continuously
The button illuminates and blinks and the 7-segment display
shows the current level (in digits). “0” corresponds to normal
level (“NORM”)
4
1 Using the V-SHARP and H-SHARP buttons
To end the rapid adjustment, release the + button or – button
2 Using the V-SHIFT and H-SHIFT buttons
3 See the relevant items defined in
Table 1
4 The 7-segment display starts to quickly scan the range. When it stops running, it has reached the maximum or minimum,
respectively
