KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your SP-11D Digital Video Processor
6
Table 1: Front Panel SP-11D Digital Video Processor
#
Feature
Function
1
POWER
Switch
Illuminated switch for turning the unit ON or OFF
2
INPUT
STANDARD
LEDs
Cycle between PAL B, PAL N, PAL M, NTSC 3, NTSC 4, and
SECAM. The corresponding LED lights
3
INPUT
Selector Button
Press to select the source, illuminating the appropriate LED
4
INPUT
LEDs
Cycle between the video sources: CV, YC, YUV, and RGB/S. The
corresponding LED lights
5
AUTO
Button
Toggles between automatically recognizing the input standard
(lighting the appropriate LED) and the manual selection mode
6
OUTPUT
STANDARD
LEDs
Cycle between PAL B, PAL N, PAL M, NTSC 3, NTSC 4, SECAM
and SDI. The corresponding LED lights
7 (COMPONENT
) OUTPUT
Button
Selects the component video output signal
8 COMPONENT
OUTPUT
LEDs
Cycle between YUV, RGB, and RGBS. The corresponding LED
lights
9 STANDARDS
Button
Selects the output video standard
10
SCH
Button
Press the SCH button and adjust the subcarrier to horizontal
phase relative to the genlock source, using the + and – buttons
11
GENLOCK
Button
Press to enable GENLOCK operation
12
SPLITTER
Button
Press the SPLITTER
button and adjust the position of the
boundary between the edited image and the original image, using
the + and – buttons
13
DELAY
Button
Press the DELAY
1
14
button and adjust the H-delay of the output
signal relative to the genlock source, using the + and – buttons
V-SHARP
Button
Press the V-SHARP button and adjust the vertical sharpness
using the + and – buttons
15
H-SHARP
Button
Press the H-SHARP button and adjust the horizontal sharpness
using the + and – buttons
16
BRIGHTNESS
Button
Press the BRIGHT button and adjust using the + and – buttons
17
CONTRAST
Button
Press the CONTRAST button and adjust using the + and – buttons
18
H-SHIFT
Button
Press the H-SHIFT button and adjust H-Chroma-Luma delay using
the + and – buttons to enable horizontal shifting of the image
19
V-SHIFT
Button
Press the V-SHIFT button and adjust V-Chroma-Luma delay using
the + and – buttons to enable vertical shifting of the image
20
GAIN
Button
Press the VIDEO GAIN button and adjust using the +
2
and –
3
21
buttons
Y/GREEN
Button
Press the Y
4
/GREEN
5
button
6
22
and adjust using the + and –
buttons
COLOR
Button
Press the COLOR
7
23
button and adjust using the + and – buttons
U/BLUE
Button
Press the U
4
/BLUE
5
button
6
and adjust using the + and – buttons
24
HUE
Button
Press the HUE
1
1 Data delay problems, especially with long cables, occur when electronic signals travel via coaxial cable and the picture
shifts mainly in the horizontal axis (due to unequal delays between the sync signals and data). Center the picture by pressing
the DELAY button and adjust via the + and – buttons
button and adjust using the + and – buttons
2 To add brightness
3 To fade the picture in and out
4 For YUV
5 For RGB
6 When the COLOR SPACE button is selected
7 Pressing the + button enhances dull colors. Pressing the – button reduces distortion (snow)
