KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the SP-11D Digital Video Processor
14
Press the + button or – button once to gradually increase or
decrease the current level by one unit (the 7-segment display
shows the new level)
To increase or decrease the current level rapidly, press and hold
down the + button or – button, continuously
1
Note, if you want to:
. To end the rapid
adjustment, release the + button or – button
•
Set the normal level (“NORM”) of the current level, press and
simultaneously hold down both the + button and – button.
The 7-segment display shows “0”
•
Undo the adjustment, press the appropriate button one more time. The
appropriate button no longer blinks
•
Save the result of the adjustment, press the STORE button twice
•
Store the result of the adjustment in another setup #, press the STORE
button once, select a setup # between 1 and 16 by pressing the + and –
buttons, and then press the STORE button once again
If the adjustment is set such that the level setting is at its normal level
(“NORM”), the appropriate button no longer illuminates (otherwise this
button continues to illuminate in the main mode).
7.1 Storing/Recalling Setups
You can store and recall up to 16 setups (or adjustments) in non-volatile
memory, using the STORE and RECALL buttons together with the + and –
buttons.
To store
2
•
Press the STORE button and then select a setup # between 1 and 16 by
pressing the + and – buttons (the current settings are saved to that
setup #)
a setup, do the following:
•
Press the STORE button once again
To recall a setup, do the following:
•
Press the RECALL button and then select the appropriate # (that
corresponds to the setup #) by pressing the + and – buttons (the
selected setup is recalled)
•
Press the RECALL button once again
1 The 7-segment display starts to quickly scan the range. When it stops running, it has reached the maximum or minimum
setting
2 Storing a new setup over a previous setup # replaces the previous setup #
