KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Router Mode Keys
16
Table 6: Audio Output Type Key for the VP-23N/VP-23RC
Press key:
To adjust the audio level of the:
1
CV group
2
s-Video group
3
VGA group
4
Microphone
5
Master audio out
Decreasing the Volume of the VP-23N
To increase the volume, point the remote control transmitter at the remote
receiver and do the following:
1. Press the VOL- key.
2. Press the numeral key defining the audio signal
3
continuously until the volume
decrease is satisfactory.
7.4.2
Controlling the VP-26 via the RC-IR2
You can control the
VP-26
Presentation Switcher
using the
RC-IR2
to do the
following:
Switch inputs to outputs (see section 7.4.2.1)
Adjust the volume (see section 7.4.2.2)
7.4.2.1 Switching an Input to an Output
The
VP-26
Presentation Switcher
includes four independent switchers and
one Master audio switcher. Each independent switcher has two outputs and
the remote controller defines the groups as illustrated in Table 7.
Figure 5: VP-26 Switcher Selector Buttons
The independent switchers are defined in groups, as described in Table 7. The
Master audio is defined as Group 1.