
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Router Mode Keys
14
7.4 Controlling a Presentation Switcher
This section describes how to control Presentation Switchers using the
RC-IR2
. To control the:
VP-23N
and the
VP-23RC
, see section 7.4.1
VP-26
, see section 7.4.2
7.4.1
Controlling the VP-23N
1
via the RC-IR2
You can control the
VP-23N
Presentation Switcher
using the
RC-IR2
to do
the following:
Switch inputs to outputs (see section 7.4.1.1)
Adjust the volume (see section 7.4.1.2)
7.4.1.1 Switching an Input to an Output
The
VP-23N
Presentation Switcher
includes three independent switchers and
one Master audio switcher. Each independent switcher has one output and the
remote controller defines each group as illustrated in Figure 4.
Figure 4: VP-23N Switcher Selector Buttons
The independent switchers are defined in groups, as described in Table 5. The
Master Audio is defined as Group 1.
Table 5: Groups Definitions for the VP-23N / VP-23RC
The Switcher Group
Is defined as:
Video (CV)
1
s-Video (Y/C)
2
VGA/UXGA
3
1 Also applies to the VP-23RC