Kramer MV-6, Руководство пользователя, Страница: 67 / 75

MV-6 - Protocol 3000 Commands 63
Command - NET-DHCP Command Type - Communication
Command Name Permission Transparency
Set: NET-DHCP Administrator Public
Get: NET-DHCP? End User Public
Description Syntax
Set: Set DHCP mode
# NET-DHCP
␠
mode
␍
Get: Get DHCP mode
# NET-DHCP?
␍
Response
Set: ~nn@ NET-DHCP
␠
mode
␠
OK
␍␊
Get: ~nn@ NET-DHCP
␠
mode
␍␊
Parameters
mode - 0 - Do not use DHCP. Use the IP set by the factory or using the IP set command
1 - Try to use DHCP. If unavailable, use IP as above
Response Triggers
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port
if available
For proper settings consult your network administrator
Command - NET-GATE Command Type - Communication
Command Name Permission Transparency
Set: NET-GATE Administrator Public
Get:
NET-GATE?
End User Public
Description Syntax
Set: Set gateway IP
# NET-GATE
␠
ip_address
␍
Get: Get gateway IP
# NET-GATE?
␍
Response
Set: ~nn@ NET-GATE
␠
ip_address
␠
OK
␍␊
Get: ~nn@ NET-GATE
␠
ip_address
␍␊
Parameters
ip_address - format: xxx.xxx.xxx.xxx
Response Triggers
Notes
A network gateway connects the device via another network and maybe over the Internet. Be careful of
security problems. For proper settings consult your network administrator