Kramer MV-4X, Руководство пользователя

Страница: 13 / 75

Kramer Electronics Ltd.
MV-4X
– Operating and Controlling MV-4X
11
•
Setting OSD Parameters on page 17 .
•
Configuring the Logo Settings on page 18 .
•
Setting Ethernet Parameters on page 19 .
•
Setting the Preset Parameters on page 20 .
•
Configuring the Setup on page 20 .
•
Viewing the Information on page 21 .
Setting the Video Mode
MV-4X enables setting the video operation mode.
To set the video mode:
1. On the front panel press MENU . The OSD menu appears.
2. Click Video Mode , select:
▪
Matrix , and perform the following actions:
Menu Item Action Options
Fade In/Out Enable or disable cross-fading between
sources in Matrix mode. On, Off (default)
Fade Speed Set the fade speed (in seconds). 1~10 (5 default)
OUT A/B Source Select the source for output A (HDMI) and
output B (HDBT).
INPUT 1~4 (IN 1 default)
▪
PiP , PoP or Quad , and perform the following actions:
Menu Item Action Options
WIN 1/2/3/4
Source Select the source for the specified
window. The selected configuration is
routed to output A and output B. WIN 1 Source In 1~4 (IN 1 default)
WIN 2 Source In 1~4 (IN 2 default)
WIN 3 Source In 1~4 (IN 3 default)
WIN 4 Source In 1~4 (IN 4 default)
▪
Auto (see also Defining the Auto-Layout Parameters on page 40 ), and perform the
following actions:
Menu Item Action Options
WIN 1 to WIN 4 View the number of active
windows. 2 options are displayed:
An active source is present, for
example, WIN 1>INPUT 2.
There is currently no active source:
Window Off.
Auto Layout Full screen
Auto Layout 2 Select the preferred window
arrangement to use in Auto
mode when there are 2 active
sources. Side by Side (default), PoP or PiP
Auto Layout 3 Select the preferred window
arrangement to use in Auto
mode when there are 3 active
sources. PoP Side or PoP Bottom