K-CONFIG –
Using the Triggers
109
3.
Click
the Add to List
button.
The command is added to the
Device Startup
trigger
Figure 200: Custom Events – Command added to the Action List
4.
In the same way, add all the relevant commands to the
Device Startup
trigger.
The trigger appears bold in the list.
Figure 201: Custom Events – Commands added to the Action List
To add a new custom event:
1.
Select
Custom Events
.
Figure 202: Custom Events – Add a New Trigger
2.
Click the
+
icon and type the new name.
Figure 203: Custom Events – Add a New Trigger Name
3.
Click
OK
.
If the configuration is not finalized, finalize it now.
The new trigger is added to the
Custom Events
trigger list and the
Scheduling
window automatically opens,
see
(you can open it always by clicking the
icon, or right-clicking the trigger).
For room controller devices with internal clocks, the scheduling process lets you activate All Off, All On and Custom
trigger actions according to a preset schedule. The room controller device's internal clock will synchronize with the host
