16
KraftPowercon Sweden AB, Hjalmar Petris väg 49, S-352 46 Växjö, Sweden, Tel: +46 470-705200, Fax: +46 470-705201,
www.kraftpowercon.com
OK button
The OK button is used to carry out a selected action in the action field. The normal procedure is to
first select the option or value in the presentation field using arrow up/down, and then selecting
the action in the action field using arrow left/right and then finishing with OK.
5.2.3
LED “Alarm”
The alarm-LED is turned off in normal conditions.
A flashing red light indicates that there are alarms that are waiting to be acknowledged.
A permanent red light indicates that there are alarms that have already been acknowledged but are
still active, i.e. the alarm condition is still met.
5.3
MENU
MANAGEMENT
5.3.1
General
Information exchange with the operator is based on a menu system. It has a tree-like structure with
an initial screen at the top and a main menu underneath that is divided into sub-menus.
The screen is divided into presentation field and action field, see section
5.2.1.
If the display appears in any other condition than the initial screen, there will be an automatic
return to the initial screen after about 1 hour.
5.3.2
Select menu option
Use the “
↑
” and “
↓
” buttons to select the menu option
and other options in the presentation field. The selected
option is marked in inverted text. You change the values
and setting options using the “
↑
” and “
↓
” buttons. The
exception is a few menu options where you use the “
←
” and “
→
” buttons for setting options.
The menu options could be more than the number of available rows in the display. In these
situations a “rolling” menu appears. This means that more options appear when you move
“outside” the existing rows. It works in principle as if they were printed on a roll that rotates. This
also means that you ultimately return to the beginning if you continue to step through the list. A
dashed row shows the limit between the beginning and end of the menu options.
5.3.3
Take action
Use the “
←
” and “
→
” buttons to select the action to take
in the action field. End with OK to execute the selected
action.
The
Select
action means that you confirm the option you
have selected in the presentation field.
The
Return
action means that you leave the existing menu screen and go back a step to the initial
screen.
5.3.4
Adjust value
The values are changed one digit at a time. Select number using the “
←
” and
“
→
” buttons. Now adjust the number up/down using the “
↑
” and “
↓
” buttons.
End with OK when the value is the one you want.
=====MAIN MENU=====
Show
Charge control
Alarm
Settings
Advanced
________________________________
Select Return
Select menu option
with
↑
and
↓
.
=====MAIN MENU=====
Show
Charge control
Alarm
Settings
Advanced
________________________________
Select Return
Select action option
using
←
and
→
.
Adjust
Float charging level,
Ufloat (at 20°C)
120.40V
________________________________
Ready
