3
This fireplace has been tested by OMNI-Test Laboratories, Portland, Oregon and complies with:
ANSI Z21.97-2012 • CSA 2.41-2012, “Standard for Outdoor Decorative Gas Appliances.”
CAN/CGA 2.17-M91 (R2009), “Gas-Fired Appliance for Use at High Altitudes.”
LP GAS
NATURAL GAS
MAXIMUM INLET GAS PRESSURE
11” WC (2.74 kPa)
7” WC (1.74 kPa)
BURNER ORIFICE SIZE
#50
#41
BTU/HR
40,000 BTU/hr (11.72 kW/hr)
40,000 BTU/hr (11.72 kW/hr)
CODE AND SUPPLY REQUIREMENTS: When an appliance is for connection to a fixed piping system, the installation must conform
with local codes, or in the absence of local codes with the
National Fuel Gas Code, ANSI Z223.1/NFPA 54; International Fuel Gas Code,
Natural Gas and Propane Installation Code, CSA B149.1;
or
Propane Storage and Handling Code, B149.2,
as applicable
.
The appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes with the
National Electrical Code, ANS/NFPA 70;
or the
Canadian Electrical Code, CSA C22.1,
if applicable.
For appliances for use with a fixed fuel piping system and equipped with an appliance gas pressure regulator, the appliance and its
individual shutoff valve must be disconnected from gas supply piping system during any pressure testing of that system at pressures in
excess of ½ psi (3.5 kPa).
The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure
testing of the gas line at test pressures equal to or less than ½ psi (3.5 kPa).
NOTE
If installing optional Color Changing LED Light Kit, do so in conjunction with assembling this appliance. If installing at a later
date, some disassembly will be required.
ADDITIONAL COMPONENTS REQUIRED
Media Tray Cover
Wind Guard Kit (2 styles available. See dealer for details).
Color Changing LED Light Kit
OPTIONAL ACCESSORIES
20 lb. (9.1 kg) propane cylinder constructed and marked in accordance with the
U.S. D.O.T
.
Specifications
for LP-Gas Cylinders,
or the
Standard for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and Commission, CAN/CSA B399
.
Tile Kit. Purchased Separately.
STATE OF MASSACHUSETTS:
Installation and repair must be done by a plumber or gas fitter licensed in the Commonwealth of Massachusetts.
Flexible connectors shall not exceed 36 inches in length.
The appliances individual manual shut-off must be a T-handle type valve.
GENERAL INFORMATION
NOTE
Porcelain tile is recommended for all outdoor applications.
Tile Trim Kit (included) is designed to accommodate 1/4” (6mm) thick porcelain tile.
WARNING
This appliance is manufactured for use with LP Gas. If converting to Natural Gas, contact a licensed plumber or gas fitter to
perform the necessary tasks required to connect appliance to Natural Gas supply and convert appliance to Natural Gas.
f i r e - p a r t s . c o m