46 VENTING
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#CLW-50 R.4 November 2019
Attachment Screws
Vent Stand-off Tab
7.8 Horizontal Heat Shield Installation
IMPORTANT: The horizontal vent heat shield must be installed when
using a horizontal 45° elbow off the back of the appliance.
1. Bend perforation on the (1) hand-tab down on the horizontal
vent heat shield.
2. Locate the (2) screw holes located above the flue outlet on the
back of the fireplace.
3. Align the (2) slots on the heat shield with the corresponding
(2) screw holes on the back of the fireplace. Secure with the
attachment screws (provided). The 1” (25mm) vent stand-off tab
will rest on top of the vent pipe.
Figure 7.3, Installed Heat Shield Assembly