Kozlusan SLIMPEL, Руководство пользователя

Страница: 19 / 21

Page 19
TROUBLESHOOTING
FAILURE CAUSE REMEDY
Dark screen
Emergency switch turned OFF Turn it ON
Safety Temperature Limiter has relased Let the boiler cool down to 80
°
C
Reset the Safety Temperature Limiter and search for
cause (e.g. Defect pump..)
Error: Out of Pellets
No more pellets in fuel hooper Refill
Defective pellet level sensor > Inform customer service
Error: Ignition failed
Too cold ambient temperature
The ambient temperature should be 0-45
°
C for
proper working
Low quality pellets Change pellets
Ignition device malfunction > Inform customer service
Exhaust fan malfunction > Inform customer service
Error: Overtemperature detected
Boiler temperature exceed 95
°
C Let the boiler cool down
Circulation pump malfunction > Inform customer service
Defective controlled board > Inform customer service
Defective temperature sensor > Inform customer service
Error: Back burning to auger
The temperature of the auger exceeded
the limit thermostat's value
Back burning to auger
Defective back burning detection
thermostat
> Inform customer service
Lost connectivity between the controller
and back burning detection thermostat
> Inform customer service
Error: Memory allocation error
Problem occured in the control panel Reset controller
If the problem persists after reset > Inform customer service
Error: FLASH checksum error
Problem occured in the control panel Reset controller
If the problem persists after reset > Inform customer service
Error: FILESYSTEM error
Problem occured in the control panel Reset controller
If the problem persists after reset > Inform customer service
Error: Sensor malfunction ( sensor no )
T3: Boiler - Defective sensor > Inform customer service
T2: Weather - Defective sensor > Inform customer service
T1: Buffer tank - Defective sensor > Inform customer service
Tc1: Exhaust - Defective sensor > Inform customer service