Kozlusan Propel 25, Руководство пользователя

Страница: 17 / 25

17 | P a g e
Cleaning of secondary air channels in burnpot and the base of burnpot





Disconnect hopper from boiler and unscrew internal pellet feed auger from cumbustion chamber



Unscrew burnpot from cumbustion chamber and remove for cleaning
In Addition
 Inspection of the grate cleaning lever
 Inspection of gaskets on the combustion chamber door and ash box
 Operational test of the heat exchanger cleaning
 Cleaning of the exhaust sensor
 Test the ignitor tube for residue
 Test upper and lower parts of the burner for damage and leaks
 Test the intervals of the sensors (grate motor, separator)
 Lubrication of the heat exchanger cleaning drive and grate bar
 Exhaust gas measurement
Maintenance every 3 years
Maintenance volume from the yearly maintenance and the following additional work
 Visual check and cleaning of the hoist basket lever for the heat exchanger cleaning:
In addition, remove the boiler cover, vacuum out the existing ashes and check the function of the hoist
basket lever. According to function control, using caulking strip newly caulk the boiler cover and
reassemble.
 Cleaning of secondary air channels in burnpot and the base of burnpot.
Detach the hopper tank from the boiler firstly. Then remove the burnpot carefully.
 Test run of all electrical equipment