Kozlusan Propel 25, Руководство пользователя

Страница: 12 / 25

12 | P a g e
Chimney Installation
A chimney performs two functions: it removes smoke and flue gases from the heating system, and it
provides “draft” for the fire. Draft is the term used to describe the suction that occurs when hot air
rises and creates a vacuum in the firebox. That vacuum draws fresh air into the firebox and feeds
combustion of the wood. No heating system can operate properly without adequate draft.
Proper installation of the chimney flue is critical to the performance of your Kozlusan Heating System.
The majority of problems encountered after installation are attributable to a flue that is improperly
sized or otherwise provides inadequate draft to the heating system.
You may connect the Kozlusan Heating System to an existing flue or chimney subject to the following
conditions.
1. A qualified professional has inspected, repaired (if necessary), thoroughly cleaned the chimney and
determined it is suitable for use with a residential heating appliance that burns solid fuel.
2. The chimney or flue should be at least 3-4 m tall and sized correctly for the Kozlusan Heating
System model installed.
3. Do not share a flue with another heating system, appliance or fireplace. Do not use a flue that
already provides make-up air to the cellar or basement.
4. Tightly close the cleanout opening in the base of the chimney.
Frost & Overheat Protection
The heating system is leak-tested at the factory during final assembly, and the heat transfer fluid
drained for shipment. The recommended solution is a mix of 30% propylene glycol to 70% water
unless you are located in a very cold climate, or you plan to leave the heating system unused for a long
period of time. A 30% solution of propylene glycol is adequate to lower the freezing point to -13º C
and raise the boiling point to 102º C.
CAUTION: DO NOT use ethylene glycol-based (automotive antifreeze) coolant in your Kozlusan
Heating system or in your home’s heating system. Always use propylene glycol -based coolants
.