10
• Automatically balance the temperatures: When the water temperature
in the tank reaches the set one , it will automatically cut off the power
and halt heating. Meanwhile, the heating indicator will put out. The
electrical water heater will be in the temperature-maintaining condition.
When the water temperature in the tank reduces to a certain one, it will
automatically begin to heat. After reaching the temperature, it will
automatically cut off the power and be in the temperature-keeping
condition. It will circulate to automatically work like these.
Note:
If the power cord is damaged, it should be repaired or replaced by
our company’s service team or a qualified service technician only.
OPERATING GUIDES
DAILY A
ND COMMON MAINTENANCES
•
Temperature setting:
According to your required temperature, rotate the
temperature-adjusting knob in the clockwise direction. You can select to
use the heating temperatures without grades in the temperature ranges of
twenty to seventy-five degrees Celsius from closing to the low, medium
and high bands or from low to high.
•
Power Selecting:
This product offers you three band power selections as
follows: 800 Watts, 1200 Watts AND 2000 Watts
• Frequently checking the connection of power source's plug and the outlet
is in good condition. Reliable, whether heating. The plug's outlet is well
connected to the ground or not.
• When it isn't in the operation for a long period of time, typically in the low
temperature zones and avoiding the water freezing in the tank, which will
cause the cracks of tank. After finishing use each time, you should make
the water in the tank pour out.
• In order to assure the electrical water heater to work with high efficiency,
you'd better clean the heating parts once each year. Remove the water
dirt's deposits accumulated on the electrical heating parts and the tank's
base (shorten the clean period if the water quality is bad).
