Shenzhen Korno Import&Export Co.,Ltd
-9-
6 Operation Interface
6.1 Gas Detection Interface
Under normal-detection mode,according to the number and types of sensors
in the device,there are different interfaces: single gas detection mode as shown in
figure6(O3 for example),two kinds of gas detection mode as shown in figure 7
(O3
、
CO for example) ,three kinds of gas detection mode as shown in figure
8(O3
、
CO
、
CH2O for example),four kinds of gas detection mode as shown in
figure 9(O3
、
CO
、
CH2O,Combustible gas for example)
The icons at the left top of the the display (refer to figures above) are time
and temperature, at the right top of the display shows the “pump status”,”battery
capacity”,”humidity”,take figure 9 for example,there are four channels ,channel 1
at the left top(O3),channel 2 at the right top(CO),channel 3 at the lower
left(CH2O2),channel 4 at the lower right(EX);figure indicate corresponding gas
concentration in each channel,lower left”o3” is the gas’s molecular formula,lower
right”PPM” is the concentration unit;when one or several gas channel reach the
alarm value,there will be a alarm sign under corresponding concentration
figure,as shown in figure 9 the CH2O channel is alarming.