Shenzhen Korno Import&Export Co.,Ltd
-15-
will trigger alarm when real-time concentration is higher than preset value.
Procedures: Enter alarm settings sub-menu, Move the cursor to “alarm
mode”,press “Ok” to select and press “Up” and “Down” to switch alarm mode,
then press “Ok” to save your modification.
6.2.7 Measure Mode
In this menu.real-time detection and timing detection are optional as it
shown in figure 32.When detector is preset as “Real Time Measure”,it provides
continuous monitoring and will shows real-time concentration in the display.As it
shown in figures 33,the device will detect the average concentration value of a
certain time period when preset as “Fixed Time Measure”,it allows user to set
timing cycle and cycle interval(interval of two timing detection),if the periodic
detection mode is not activated,gas pump and detection process will automatically
stops.
