Shenzhen Korno Import&Export Co.,Ltd
-18-
8 Concentration Datalog Output Instruction
GT 903 series gas detector allow user output history datalog via the charge
port,there are several steps to output datalog.
1)
Install concentration datalog output software in host computer
2)
Boot up the detector and wait for 60s to preheat the instrument and connect
to the computer
3)
Run the concentration datalog output software in the host computer,make
sure the detector is connected to the host computer,meanwhile at the lower
left interface of the software will show connection port standby(defaulted
baud rate is 115200,do not change)
4)
Enter the history data interface to output datalog,there will be menu prompts
at the both software and detector interface.
5)
User can preset detector’s address in concentration datalog output
software(this address need to corresponded to the parameter in “address
setting”of the detector)
、
Channel(Corresponded to the gas channel of the
detector)
、
start time and finish time(datalog storage period should be within
the start and finish time)
6)
Detector allows user to search concentration of certain channel of datalog
storage period,datalog can be output as EXCEL format by “datalog output”
function.
NOTICE:Connection cable is the USB cable connected to the adapter
