Korg modvawe, Руководство пользователя

Страница: 48 / 105

Motion Sequencing 2.0
43
Seq Lane Step
Step
[A1…D16]
See “Step” on page 37.
Type
[Value + Continuous Mod, Value * /-, Value * , Value + S & H Mod]
Value + Continuous Mod: The Step uses the programmed value, and modulation continuously affects the value. For
instance, if an LFO is modulating Value , you’ll hear the LFO’s shape during the step.
Value * /-: The Step’s Value is scaled by a bipolar random amount. The result may be either positive or
negative.
Value * : The Step’s Value is scaled by a unipolar random amount. If the Value is positive, the output will be
positive; if the Value is negative, the output will be negative.
Value + S & H Mod: The Step uses the programmed value, and modulation is updated only at the start of the Step. For
instance, if an LFO is modulating Value , only the LFO’s amplitude at the very start of the step matters; you will not
hear the LFO’s shape during the step.
Value
[-100…100%]
This sets the output level for the Step.
Transition
[Off, Lin, Exp, Log]
This controls the transition from this step to the next step: whether the value changes abruptly at the next step, or
glides to the new level.
This applies only if the Shape Lane Transitn parameter is set to Indv (Individual).
Off : The value will change abruptly at the next step.
Lin : The value will glide linearly to the next step, as if you were moving a knob continuously. This is the default.
Exp : The value will glide to the next step, with most of the change at the end of the glide.
Log : The value will glide to the next step, with most of the change at the start of the glide.
Probability
See “Step Probability” on page 35.