Korg EFGSCJ 3, Руководство пользователя

Страница: 13 / 112

13
2. Change the name of the pattern you want to save.
You can move the cursor on the display left and right using the
< button or the > button and determine the character you want
to change. Turn the Value knob to change the selected charac-
ter and confirm it with Menu/Enter button.
3. Select a pattern number to save your data by using the Value
knob.
4. Press the Write button after you complete the process of
changing the pattern name.
Pressing the Write button starts the save process. The Write
button is illuminated while the save process is taking place
and the button becomes dark when upon completion.
TIP
Press the Exit button to cancel the save process.
TIP
The Pattern number where the edited pattern will be saved
is selected after you complete the save process.
Editing a pattern
1. Muting a part
1. Press the Part Mute button to illuminate the button.
2. Press the part of the trigger pad that you want to mute to turn
it off.
3. Press the trigger pad that is dark to illuminate it when you
release the mute.
2. Erasing a part
1. Press the Part Erase button to illuminate the button.
2. During playback, press the trigger pad of the part which you
want to erase.
While holding the trigger pad, note information of the selected
part will be erased.
TIP
To erase all sequence information of the currently selected
part, select CLEAR SEQUENCE from PART UTILITY in
the edit menu and execute it.
TIP
Execute the Clear Motion command in the edit menu to
erase the motion sequence.
3. Copying a part
1. Select COPY PART from PART UTILITY in the edit menu.
2. Select the pattern that includes the part you want to copy, and
press the Menu/Enter button.
3. Press the trigger pad corresponding to the copy source part.
4. Press the trigger pad corresponding to the copy destination
part.
4. Changing pattern setting
The following list introduces main setting related to patterns in the
edit menu.
Refer to the “Parameter Guide” for each setting.
SWING: Adds shuffling or hopping feelings by shifting sound
timing.
BEAT: Sets beat (rhythm) of a pattern.
LENGTH: Changes length of a pattern. You can set it to length
from 1 to 4.
PATTERN LEVEL: Adjusts sound volume of the entire pattern.
KEY: Sets pitch for scale reference.
SCALE: Sets scale for playing with the trigger pad or the touch
pad by turning the Keyboard button ON.
GROOVE TYPE and GROOVE DEPTH: Adds playing methods
of typical musical instruments and / or a groove which could
reproduce a feeling of the song to metronomic part sequence data.
CHAIN REPEAT, CHAIN TO: After playing back the selected
pattern, select the number of times to play back the same pattern,
and select the pattern to play back next. This will play multiple
patterns back as if they were a song.