Korg Digital Mixer ZERO8, Руководство по обслуживанию

Страница: 33 / 42

ZERO4/ZERO8 Notice for the system update
2007.6.13 ootsu
(There may be some difference in the Windows display by translation from Japanese MY.)
ZERO4/ZERO8 uses several microcomputers, and these need each software
which are written in the flash ROMs. When repairing in case of PCB changing,
you need to do the update of softwares.
When the changing of the Firewire board, you need to assign the GUID.
This document is for the changing of the PCBs, [1] System software update
[2]Firewire firmware update [3] GUID writing for the firewire board.
PCBs on which microcomputers are mounted.
ZERO4
Main PCB
KLM-2708 1 ADI Blackfin
2 NEC 78K0/KF2
Fader PCB KLM-2718 3 NEC 78K0/KB2 x 2
Firewire board KLM-2778 5 BridgeCo DM1500
ZERO8
Main PCB
KLM-2708 1 ADI Blackfin
2 NEC 78K0/KF2
Panel PCB KLM-2709 3 NEC 78K0/KB2
Fader PCB KLM-2718 4 NEC 78K0/KB2 x 4
Firewire board KLM-2778 5 BridgeCo DM1500
Regarding 1-4, these are installed by the System update.
Regarding 5, this is installed by the firewire update.
[1] System Update
[1.1:Equipments and tool]
1
WindowsXP computer (HomeEdition or ProfessionalEdition) with Firewire terminal
2 Firewire cable
3 KORG System update utility "kmupdate.exe" (software)
4 System file(*.vsb file)
*When system update KORG Firewire Audio/MIDI driver is needed for the WindowsPC
(for the details see owner's manual.)
[1.2:ZERO4/ZERO8 process of the system update]
BPM Select1
KEEP
FirewireLED
In case of ZERO4
In case ofZERO8
FirewireLED
EXT1 CUE
BANK C