Korg Digital Mixer ZERO8, Руководство по обслуживанию

Страница: 27 / 42

Confirm that the MIC GAIN switch (under the MIC2 TRS) of ZERO8 is "HIGH".
Set the CH1-8 INPUT SELECTORs to "MIC2".
Set the CH1-8 GAIN to the center.
Press the PLAY switch of D3200. (Demo song starts.)
Set the CH1 module FADER to "10".
You can hear the demo song of the D3200 through the headphones,
confirm that there is not noise and fragmentary sound.
Press the MIC GAIN (under the MIC2 TRS) and set it to "LOW".
Confirm that the sound of the headphones becomes smaller.
Set the CH1 module FADER to "0".
Press the MIC GAIN (under the MIC2 TRS) and set it to "HIGH".
Same way confirm until CH8.
After confirmed CH8,
press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Pull out the cables which are connected.
Press the PHANTOM (under MIC1 TRS MIC GAIN) of ZERO8.
Confirm that the "MIC1+48V" LED between INPUT SELECTOR1 and 2 light.
Press the PHANTOM switch again,"MIC1 +48V"LED turned off.
Press the PHANTOM (under MIC2 TRS MIC GAIN) of ZERO8.
Confirm that the "MIC 2 +48V" LED between INPUT SELECTOR1 and 2 light.
Press the MIC2 PHANTOM switch again,"MIC2 +48V"LED turned off.
press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Pull out the cables which are connected.
KORG INC.
ZERO8 (X-5810) Check before Shipping
Revised
No.
Date 11／14 2007.4.25
QCI-5810 Page