Korg Digital Mixer ZERO8, Руководство по обслуживанию

Страница: 24 / 42

・Confirmation of PHONO INPUT1,2,3 (RCA)
Set all CH FADERs of ZERO8 to "0" position.
Set all GAINs of ZERO8 to "-"(left end).
Connect the ZERO8 and the D3200 like following.
ZERO8 CH1 PHONO L - D3200 MASTER OUT L
ZERO8 CH1 PHONO R - D3200 MASTER OUT R
Set the MASTER FADER of the D3200 to "60".
Set the CH1-8 INPUT SELECTORs to "PHONO 1".
Connect the headphones to MONITOR R of ZERO8.
Press the PLAY switch of D3200. (Demo song starts.)
Set the "LEVEL" to MAX(right end).
Set the CH1 GAIN of ZERO8 to the center.
Set the CH1 CH FADER to "10".
You can hear the demo song of the D3200 through the headphones,
confirm that there is not noise and fragmentary sound.
Set the CH1 CH FADER of ZERO8 to "0".
Set the CH1 GAIN of ZERO8 to "-"(left end).
Set the CH2 GAIN of ZERO8 to the center.
Set the CH2 CH FADER to "10".
You can hear the demo song of the D3200 through the headphones,
confirm that there is not noise and fragmentary sound.
Set the CH2 CH FADER of ZERO8 to "0".
Set the CH2 GAIN of ZERO8 to "-"(left end).
Same as above do the check of CH3-8.
After finished CH8,
press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Confirm that all CH FADERs of ZERO8 are "0".
Confirm that all GAINs of ZERO8 are "-"(left end).
Connect the ZERO8 and the D3200 like following.
ZERO8 PHONO２ L ― D3200 MASTER OUT L
ZERO8 PHONO２ R ― D3200 MASTER OUT R
Set the CH1-8 INPUT SELECTORs to "PHONO 2".
Same way as the PHONO1, confirm that the sound from PHONO2 can be heard
by each channel.
After finished CH8 of PHONO2,
press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Confirm that all CH FADERs of ZERO8 are "0".
Confirm that all GAINs of ZERO8 are "-"(left end).
KORG INC.
8／14 2007.4.25
QCI-5810 Page
ZERO8 (X-5810) Check before Shipping
Revised
No.
Date