Korenix JetNet 5228G Series, Руководство пользователя

Страница: 249 / 658

Link Layer Discovery Protocol
3-203
3
lldpRemTablesChange notification-events missed due to throttling or transmission
loss.
• MED Fast Start Count – Configures the amount of LLDP MED Fast Start
LLDPDUs to transmit during the activation process of the LLDP-MED Fast Start
mechanisim. (Range: 1-10 packets; Default: 4 packets)
The MED Fast Start Count parameter is part of the timer which ensures that the
LLDP-MED Fast Start mechanism is active for the port. LLDP-MED Fast Start is
critical to the timely startup of LLDP, and therefore integral to the rapid availability
of Emergency Call Service.
Web – Click LLDP, Configuration. Enable LLDP, modify any of the timing parameters
as required, and click Apply.
Figure 3-114 LLDP Configuration
CLI – This example sets several attributes which control basic LLDP message
timing.
Console(config)#lldp 4-256
Console(config)#lldp refresh-interval 60 4-258
Console(config)#lldp holdtime-multiplier 10 4-256
Console(config)#lldp tx-delay 10 4-259
Console(config)#lldp reinit-delay 10 4-258
Console(config)#lldp notification-interval 30 4-257
Console(config)#lldp medFastStartCount 6 4-257
Console(config)#exit
Console#show lldp config
LLDP Global Configuation
LLDP Enable : Yes
LLDP Transmit interval : 60
LLDP Hold Time Multiplier : 10
LLDP Delay Interval : 10
LLDP Reinit Delay : 10
LLDP Notification Interval : 30
LLDP MED fast start counts : 4
.
.
.