Korenix JetLink 1102, Руководство пользователя

Страница: 40 / 52

JetLink 1102/ JetLink 1302 User Manual
40
The following table describes the items in the previous figure.
Item Description
Modbus/TCP and EtherNet/IP interface use the same IP address setting
Mode Click the drop-down menu to select the IP address setting mode: Static address, or DHCP client.
IP Address Enter a value to specify the IP address of the interface. The default is 192.168.10.1.
Subnet Mask Enter a value to specify the IP subnet mask for the interface. The default is 255.255.255.0.
Gateway Enter a value to specify the default gateway for the interface. The default is 192.168.1.254.
Modbus/TCP and
EtherNet/IP interface use
the same IP address
setting
Check the option to use same IP address setting on Modbus/TCP and EtherNet/IP interface. In this mode,
the Ethernet ports of Modbus/TCP and EtherNet/IP are bridged, so the traffic can be forwarded between
these interfaces.
Unchecked the option to use two different IP subnet on Modbus/TCP and EtherNet/IP interface. In this mode,
the Ethernet ports of Modbus/ TCP and EtherNet/IP are not bridged, so the traffic can't be forwarded between
these interfaces.
EtherNet/IP IP Address Setting
Mode Click the drop-down menu to select the IP Address Setting mode: Static address, or DHCP client.
IP Address Enter a value to specify the IP address of the interface. The default is 192.168.10.1.
Subnet Mask Enter a value to specify the IP subnet mask for the interface. The default is 255.255.255.0.
Gateway Enter a value to specify the default gateway for the interface. The default is 192.168.1.254.