Korea Nakajo NSM-25G0MW Скачать руководство пользователя страница 3

There is a risk of electric shock or fire 

Please connect plug to wall socket with

grounding terminal(If you don’t connect 
to grounding terminal, there may be
malfunction and failure in the machine)

If you connect several plugs to one wall socket,
it may cause malfunction

Please do not use loose wall socket or
damaged power plug or electric cord. 
Please do not pull out electric cord

3

Marks and Meanings of [Warning] and [Precaution]

Warning

Mark to express possibilities of dangers and of injuries or serious wounds 
in case of ignoring this mark and misusing the machine

Mark to express possibilities of dangers and of injuries, serious wounds, or
physical damages in case of ignoring this mark and misusing the machine

Warning

Precaution

1

Preparation

1-1. Precautions and warnings for safety

Please do not touch power plug with wet
hands

When cleaning the machine,

please pull out power plug

There is a risk of electric 

shock or fire

During operating the machine, please do
neither move the machine, nor open upper
cover, nor dismantle and repair it

There is a higher risk of

injury and it may cause
damages to the machine

When not using the machine, please
remove power plug from wall socket

There is a risk of electric shock 

or fire by lightning 

If there is an abnormal sound, odor or
smoke, please turn off immediately the
switch, pull out power plug, and 
contact to the service center

It may be a malfunction 
of the machine

There is a risk of fire

When repair is needed, please contact to
the service center

Except for the appointed
technician, please do not 
dismantle, repair or 
remodel the product. 
There is a risk of malfunction, 
fire, and electric shock 

Содержание NSM-25G0MW

















Отзывы: